A project of the BMBF nanoCare funding programme


NanoExpo Project Logo

Nanobalance detectors for individual-related measure-ments of nanoparticle exposures

 

publications

Publications

 
Overall Findings of The Project NanoExpo (2010-2013)

The practical assessment of exposure to nanoscale aerosols that are released from synthetic materials requires a novel measurement technology based on easy-to-operate, robust sensors that are ready for use instantly after switch-on. Since currently suitable nanoparticle detectors for continuous personal and mobile measurements of workplace exposure to synthetic nanoparticles (NP) are not available at an acceptable price of less than 500 €, the realisation of this approach calls for a compromise between sensor performance and sensor price.

Within the NanoExpo joint project a cantilever nanoparticle detector "Cantor" was developed that combines a microcontroller-controlled MEMS cantilever resonance balance with an electrophoretic nanoparticle separator. Determination of nanoparticle mass concentrations by means of Cantor is much faster than by means of conventional filter sampling and weighing. An upstream membrane filter or impactor ensures that no microparticles get into the measuring cell.

After calibration using the FMPS (fast mobility particle sizer), a measurement uncertainty of less than ± 15 % within a measurement range of 0-50 µg/m3, and a detection limit of 6.5 µg/m3 are achieved for carbon nanoparticles. The sampling time per measurement point is 2.4 min. The error of measurement remains at <15 % in the case of variations in environmental conditions such as temperature (ΔT <1 °C), humidity (ΔrF <10 %), and pressure (Δp <1 kPa). The completely integrated setup with air intake, control and read-out electronics as well as LCD display weighs less than 400 g. The life of the battery during continuous operation exceeds an eight-hour working shift.

The expected price of the device is particularly attractive: Due to the fact that the MEMS-manufactured cantilever balance is the only more expensive component, whereas the remaining components are standard parts, the component costs amount to only 200 €. Considerable price reductions can be achieved by manufacturing larger quantities.

In an air-conditioned measurement chamber, comprehensive Cantor tests were carried out on carbon, TiO2 and SiO2 aerosols and cigarette smoke and e-cigarette vapour were analysed in the laboratory. After testing, Cantor can be easily dismantled and regenerated. Upon further optimisation of the cantilever balance and evaluation circuitry, rapid improvement is expected for parameters with a detection limit below 1 µg/m3 and a sampling time of less than 1 min as well as for weight and volume of the measurement cell.

 


Project lead

 Institute of Semiconductor Technology, TU Braunschweig PD Dr. Erwin Peiner, TU Braunschweig,  Institute of Semiconductor Technology

 

Partner

 Institute of Semiconductor Technology, TU Braunschweig TU Braunschweig, Institute of Semiconductor Technology
Fraunhofer Institute for Wood Research, Wilhelm-Klauditz-Institute (WKI)  Fraunhofer Institute for Wood Research, Wilhelm-Klauditz-Institute (WKI)

 


Duration : 01.05.2010 - 30.04.2013 (extended to  31.10.2013)


 

Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
Ok